Laboratory LBR-3

Laboratory LBR-3

The laboratory of drilling fluid LBR-3 (Laboratory LBR-3) is designed to determine the parameters in field conditions of the quality of drilling mud.

 

Laboratory equipment allows the control of the following solution parameters:

  • – filtration rate cm³ at a pressure of 0.098 MPa ( 1 kg/cm² )
  • – conditional viscosity, s – ( from 15 to 100 )
  • – mud density of 0.8 to 2.6 g/cm³
  • – sand content (50 ml of solution in the sample), ml – ( from 0.5 to 10 )
  • – stability of drilling mud
  • – daily sludge in ml.
  • – solution temperature ( from 0 to 100 ) °С
  • – chemical activity (pH), pH – ( from 0 to 14 )
  • – overall dimensions, mm – ( 589x500x175 )
  • – laboratory weight, kg – ( 19 )

Laboratory delivery kit:

  • Areometer ABR-1M, pcs – ( 1 )
  • VBR-2 viscometer, pieces – ( 1 )
  • VM-6M device, pcs – ( 1 )
  • The sump OM-2, pieces – ( 1 )
  • Cylinder CS-2, pcs – ( 1 )
  • Measuring cylinder with spout, per 100 ml., Pieces – ( 1 )
  • Thermometer from 0 to 100 °С, pcs – ( 1 )
  • Mug measured 1l. with scale, pieces – ( 1 )
  • Universal indicator paper for pH determination from 0 to 14, pack. – ( five )
  • Capacity with oil 1l., Piece – ( 1 )

ZIP (spare parts for devices):

  • – device PTR-1, for calibration of the device VM-6, pcs – ( 1 )
  • – gaskets for the VM-6 device (set of 4 gaskets) – ( 1 )
  • – gasket for the sedimentation tank OM-2, pieces – ( 1 )
  • – rubber stopper, pcs – ( 1 )
  • – filter paper, sheets – ( 500 )
  • – PVC gloves with inner textile coating, pair – ( 1 )
  • – thin latex gloves, pair – ( 2 )
  • – stopwatch, pieces – ( 1 )
  • – cotton napkins, pieces – ( 3 )
  • – documentation (operating manual, calibration procedures), pcs – ( 1 each )
  • – brush (for cleaning), pieces – ( 1 )
  • – magnifier, pieces – ( 1 )
  • – notebook for records, pieces – ( 1 )
  • – fountain pen, pieces – ( 1 )