The laboratory of drilling fluid LBR-3 (Laboratory LBR-3) is designed to determine the parameters in field conditions of the quality of drilling mud.
Laboratory equipment allows the control of the following solution parameters:
- – mud density of 0.8 to 2.6 g/cm³
- – conditional viscosity, s – ( from 15 to 100 )
- – filtration rate at pressure 0.098 MPa ( 1 kg/cm² )
- – sand content (50 ml of solution in the sample), ml – ( from 0.5 to 10 )
- – stability of drilling mud
- – daily sludge in ml. – 100
- – solution temperature ( from 0 to 100 ) °С
- – chemical reactivity (hydrogen value), pH – ( from 0 to 12 )
- – overall dimensions (LxWxH), mm – ( 580x170x550 )
- – laboratory weight, kg – ( 19 )
Laboratory delivery kit:
- Areometer ABR-1M, pcs – ( 1 )
- VBR-2 viscometer, pieces – ( 1 )
- VM-6M device, pcs – ( 1 )
- The sump OM-2, pieces – ( 1 )
- Cylinder CS-2, pcs – ( 1 )
- Measuring cylinder with spout, per 100 ml., Pieces – ( 1 )
- Thermometer from 0 to 100 °С, pcs – ( 1 )
- Universal indicator paper for determining pH, pack. – ( 5 )
- Mug measured 1l. with scale, pieces – ( 1 )
- Capacity with oil 1l., Piece – ( 1 )