Laboratory LGR-3

Лаборатория ЛГР-3

The laboratory of the LGR-3 mud solution (the Laboratory of the LGR-3) is intended for determining the parameters in field conditions of the quality of the drilling mud.

Laboratory equipment allows the control of the following solution parameters:

– filtration rate cm³ at a pressure of 0.098 MPa (1 kg / cm ²)
– conditional viscosity, s – (from 15 to 100)
– mud density of 0.8 to 2.6 g / cm³
– sand content (50 ml of solution in the sample), ml – (from 0.5 to 10)
– stability of drilling mud
– daily sludge in ml.
– solution temperature (from 0 to 100) ° С
– chemical activity (pH), pH – (from 0 to 14)
– overall dimensions, mm – (589x500x175)
– laboratory weight, kg – (19)

Laboratory delivery kit:

Areometer ABR-1M, pcs – (1)
VBR-2 viscometer, pieces – (1)
VM-6M device, pcs – (1)
The sump OM-2, pieces – (1)
Cylinder CA-2, pcs – (1)
Measuring cylinder with spout, per 100 ml., Pieces – (1)
Thermometer from 0 to 100 ° С, pcs – (1)
Mug measured 1l. with scale, pieces – (1)
Universal indicator paper for pH determination from 0 to 14, pack. – ( five )
Capacity with oil 1l., Piece – (1)

ZIP (spare parts for devices):

– device PTR-1, for calibration of the device VM-6, pcs – (1)
– gaskets for the VM-6 device (set of 4 gaskets) – (1)
– gasket for the sedimentation tank OM-2, pieces – (1)
– rubber stopper, pcs – (1)
– filter paper, sheets – (500)
– PVC gloves with inner textile coating, pair – (1)
– thin latex gloves, pair – (2)
– stopwatch, pieces – (1)
– cotton napkins, pieces – (3)
– documentation (operating manual, calibration procedures), pcs – (1 each)
– brush (for cleaning), pieces – (1)
– magnifier, pieces – (1)
– notebook for records, pieces – (1)
– fountain pen, pieces – (1)